Waterproofing

The protection of structural components, buildings, and installations from the penetration of water and ensures the normal use of buildings, installations, and equipment and increases their reliability and durability.

GREENCEMT WATERPROOFING

GREENCEMT™ WATERPROOFING (2-174) is powder base, ready to use waterproofing compound which react with the constituents of sand-cement mix to block capillaries and pores. Whilst effectively blocking the passage of water, the substrate remain breathable. GREENCEMT™ Waterproofing enhances the ability of concrete to resist sulphate attack, limits chloride ion penetration, improve the chemical resistance of reinforced concrete.

Packaging: 25kg bag

Recommended For :

For use in production of watertight concrete for:

Waterproof facilities and structures e.g:

  • Tunnels
  • Basements
  • Culverts
  • Canals
  • Water tanks
  • Inspection chambers
  • Manholes
  • Swimming pools

Characteristics an Advantages

  • Ready to use
  • Non toxic
  • Non corrosive
  • Chloride free
  • Non Flammable

GREENCEMT XTREME WATERPROOFING

GREENCEMT™ XTREME WATERPROOFING (WXWP) is an integral admixture base on powder form which greatly reduces the water absorption of concrete through its pore-blocking and hydrophobic action. The active chemical of GREENCEMT™ Xtreme Waterproofing cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the cencrete and prevent the penetration of water. GREENCEMT™ Xtreme Waterproofing enhances the ability of concrete to resist sulphate attack, limits chloride ion penetration and improve the chemical resistance of reinforced concrete.

Packaging: 25kg bag

Recommended For :

For use in the production of watertight concrete for:

Water-retaining structures e.g:

  • Reservoirs and water tanks
  • Waste water treatment plants
  • Dams
  • Swimming pools
  • Containment bunds
  • Sewers and pipelines

Waterproof facilities and structures e.g:

  • Basement
  • Parking garages
  • Underground station
  • Utility vault
  • Tunnels
  • Marine structures
  • Pile caps

GREENCEMT WATERSEAL 101

GREENCEMT™ WATERSEAL 101 (WP01) is a polymer modified, flexible and two part cementitious waterproofing coating. It is applied to concrete and mortar to prevent water infiltration in severe condition. GREENCEMT™ WATERSEAL 101 is formulated as green product with high quality of Pulverised Fly Ash. GREENCEMT™ WATERSEAL 101 enhances the ability of substrates to resist sulphate attack and limits carbon dioxide ion penetration.

Packaging: Set – 26kg bag, 10L pail

Recommended For :

Waterproofing sealing of hairline cracks and as a protective coating against aggressive elements such as carbon dioxide (for example, in concrete repair work), frost and de-icing agents.

Areas of application:

  • Water tanks
  • Car parks
  • Basements
  • Terraces
  • Balconies
  • Retaining Walls
  • Swimming Pools
  • Waste water treatment plants
  • Wet rooms for example kitchens
  • Bathroom floors and wall

GREENCEMT WATERSEAL 102

GREENCEMT™ WATERSEAL 102 (WP02) is a polymer modified and two part cementitious waterproof slurry. It is comprising of a liquid polymer and a cement based mix incorporating special admixtures. It is applied to concrete and mortar to prevent water infiltration. GREENCEMT™ WATERSEAL 102 is a green product specially formulated using high quality Pulverised Fly Ash.

Packaging: Set – 20kg bag, 5L jerry can

Recommended For :

GREENCEMT™ WATERSEAL 102 is used for:

  • Sealing fine “hairline” cracks in the concrete structures not subject to movement
  • Sealing internal basement walls against dampness
  • Rigid waterproofing of water tanks, swimming pools, etc.
  • Pore/blowhole filling
  • Interior and exterior waterproofing of concrete, cementitious rendering and brick work
  • Protection of concrete structures against the effect of de-icing salt and freeze-thaw attack
  • Exterior waterproofing of basement walls in new construction and refurbishment
  • Leveling mortar for concrete repair work

Area of application:

  • Swimming pools and fountains
  • Basements
  • Retaining walls
  • Potable concrete water tanks
  • Bathroom floors
  • Terraces and balconies

GREENCEMT WATERSEAL 103

GREENCEMT™ WATERSEAL 103 (WP03)

Packaging: Set – 20kg bag, 5L jerry can

Recommended For :

GREENCEMT WATERSEAL - A

GREENCEMT™ WATERSEAL – A (WPWA) is a single component, elastomeric, acrylic waterproofing and protectivecoating. GREENCEMT™ WATERSEAL – A upon curing forms a tough, flexible and durable coating which isto UV and other weathering agents. GREENCEMT™ WATERSEAL – A is also used to protect exposed concrete structures against carbonation and chloride ion diffusion.


Packaging: 20L pail

Recommended For :

Used as waterproofing and protective coating for the following structures:

  • Sloped concrete roof, metal profile roof and asbestos roof
  • Anti carbonation coating in car park decks
  • protective coating on underpasses and concrete bridge cracks
  • Protective coating on polyurethane foam insulation

GREENCEMT WATERSEAL - AP

GREENCEMT™ WATERSEAL – AP (WPWAP) is a high performance, single component, waterbased asphaltic-polyurethane liquid membrane system. The cured film is tough yet flexible, providing a protective and waterproofed membrane over the applied surfaces. Cured membrane is seamless and possess good bonding to the applied surfaces.

Packaging: 20L pail

Recommended For :

  • External waterproofing of flat roofs, balconies, planter boxes etc., complete with protective screed/overcoat.
  • Internal waterproofing of bathroom, kitchen and other wet areas prior to finishing work.
  • Over-coating of existing bituminous waterproofing membrane that has deteriorated.

GREENCEMT WATERSEAL - AX

GREENCEMT™ WATERSEAL – AX (WPWAX) is a unique single component water-based terpolymer liquid membrane system which cures to form a tough, flexible, pigmented, waterproofing & protective membrane. The cured membrane is seamless, durable, UV-resistant and bonds strongly to the applied metal or concrete substrates.

GREENCEMT™ WATERSEAL – AX (BEIGE GREY) (WPWAX-BEIGE)
Packaging: 20L pail

GREENCEMT™ WATERSEAL – AX (GREY) (WPWAX-GREY)
Packaging: 20L pail

Recommended For :

  • Waterproofing and protective coating over metal and concrete roof deck.
  • Trafficable coating system for light to medium traffic.
  • Anti carbonation coating for all exterior, exposed surfaces, concrete, gable end walls.
  • Repair and renovation of pitted and weathered metal roofs and decks.
  • Heavy duty trafficable coating for car park decks and ramp (with recommended reinforcement system).

GREENCEMT CAULKING GUN

GREENCEMT™ CAULKING GUN is used as a tool for squeezing adhesive out from cartridges. There are various size and ratio of cartridges that required special caulking gun. We supply diverse applicators along with chemical anchor cartridge.

GREENCEMT™ CAULKING GUN D650 (WPWAX-HC6)
Packaging: pcs

GREENCEMT™ CAULKING GUN S380 (WPWAX-G34)
Packaging: pcs

Recommended For :

GREENCEMT™ CAULKING GUN D650 (WPWAX-HC6)

  • Suitable for Greencemt 650ml cartridge of Pure Epoxy.

GREENCEMT™ CAULKING GUN S380 (WPWAX-G34)

  • Suitable for Greencemt 380ml cartridge of Polyester, Epoxy Acrylaye and Vinylester.

GREENCEMT FIX AC

GREENCEMT™ FIX AC (WPWAX-EP2000) its high haul strength, special application to wet holes and diamond drilling, excellent in acid-resisting, alkali-resisting. Anchoring installation for new construction where steel bar or bolts are not pre-embedded. RE-construction of old building, column expanding, etc. Excellent bonding with concrete and steel bar. No pressing against concrete, pull strength higher than embedded steel. Suitable for column, floor, concrete walls, etc.

Packaging: 380ml

Recommended For :

  • Fixing machines, handrails, steel constructions, and reinforcement bars.
  • Threaded Studs, Hollow masonry sleeves, threaded inserts, steel columns.
  • Medium & Heavy duty load applications, over-head installation.
  • High durability.
  • Ideal for outdoor usage, Road stitching.

GREENCEMT FIX EP

GREENCEMT™ FIX EP (WPWAX-EP500) is a two-component, high strength adhesive anchoring system. It is designed for bonding threaded rod and reinforcing bar into drilled holes in concrete base and solid masonry materials.

Packaging: 650ml

Recommended For :

  • Fixing machines, handrails, steel constructions, wooden constructions, reinforcement bars, especially suitable for big diameter rebar and rods.
  • Bonding threaded rod and reinforcing bar into hardened concrete.
  • Suitable to resist loads in cracked or uncracked concrete base material for cases where anchor design theory and criteria applies.
  • Can be installed in a wide range of base material temperatures.
  • Medium & Heavy duty load applications.
  • High durability.
  • Ideal for indoor usage.